Setup The Ip Address; Setup The Ip Address For Pc Manually - Icy Box IB-MP3012 series Manual

http://www.icybox.de
Media Player and DTV Receiver
During the process, press yellow to stop at anytime.
- When completed, you can choose whether to browse the files or not in the confirming window.
For copying between USB, HDD and NET, the operation is similar to the above steps.
5.3.2.15 Network player
This player features an Ethernet port to allow it to browse and play the media files in the other PC via Ethernet or Wireless
LAN. With a few settings and the network connection, you can sit down in the living room and watch the TV to operate this
device, to browse and playback the Video, Music and photo on your computer even it's in your study room. The network
topology is like below.
For the Wireless LAN connection, plug in the optional USB Wi-Fi dongle to apply the network function. Refer to the setup
chapter for setup WLAN.

6. seTUP THe IP aDDRess

Before using this function, you have to connect the Ethernet port to your network. For the network with a DHCP server
such as a residential gateway, you can select "DHCP IP (AUTO)". If you connect this device to your PC directly, you can
select the "FIX IP (MANUAL)" to setup an IP Address in the same IP domain of PC. Please refer to the setup section for
details.

6.1 setup the IP address for PC manually

If you connect the player to PC directly or don't have a DHCP server, you need to configure the IP Address for the Ethernet
port of PC. The procedure blew will walk you through the steps of the setting. We take the setting of Windows XP for
example.
- First, double-click on the Network icon on the task bar.
- When the setup window shows, click "Properties" button to continue.
- Choose the "Internet Protocol (TCP/IP)" and then click "Properties" button to continue.
- Click "Use the following IP address" and input the IP Address. The Static IP Address for the PC should be in the same do-
main as the one of the player. For example, setup 192.168.2.3 for PC and then setup 192.168.2.2 for the device. Please
refer to the setup section for the setting of the player.
- In the beginning, you need to check the computer name and the workgroup of your PC. The computer name and the
workgroup are exposed in the LAN for being browsed and accessed. Right click on the "My Computer" icon and select the
"Properties" to continue.
- Select the tab "Computer Name" in the pop up window, and then check the Full computer name and the Workgroup. The
computer name and the workgroup can be found by the other PC to browse and access. For the simplest network envi-
ronment, we recommend choosing "WORKGROUP" as your workgroup. The workgroup and the computer can be found by
the player in the procedure later. If you want to change the computer name or workgroup, click the "Change.." button to
the next step.
- After clicking the "Change.." button, the change window shows. Input the new computer name and the workgroup in the
respective fields and then click "OK".
- When applying the new computer name and the new workgroup, the system will remind you to restart the system to
take effect. Confirm it in the next two windows. The PC will restart.
IB-MP3012 series
31