Photo; Subtitle; Net - Icy Box IB-MP3012 series Manual

http://www.icybox.de
IB-MP3012 series
Media Player and DTV Receiver
5.2.5.4 SPDIF LPCM (2CH)
When connecting to the SPDIF receiver, select this option to output the digitized analog audio (LPCM) audio.
5.2.5.6 SPDIF RAW
Select this option for the multichannel audio. The RAW data of audio such as DD AC3 or DTS will be sent through SPDIF to
the receiver which decodes the digital audio data.
note:
For HDMI TV set + HDMI receiver: Select HDMI LPCM (2CH) or HDMI RAW.
For HDMI TV set + SPDIF receiver: Select SPDIF LPCM (2CH) or SPDIF RAW.
For HDMI TV set only: Select "HDMI LPCM (2CH)" for the correct sound.
* Because TV set receives 2CH LPCM audio only and short of digital audio decoding capability, select "HDMI RAW" might
cause the breaking audio from TV set.
5.2.5.7 Karaoke Vocal Removal
Some MTV video stores vocal and music in the audio channel separately, for example, the vocal in the right channel and
the music in the left channel. Choose one to remove Left or right channel audio. Because the audio location on every MTV
video file may be different, try to choose different audio channel to remove the right channel. The rest channel will be
output both channels so both speakers of TV set have audio. To restore the normal audio, select "Normal" to apply.

5.2.6 Photo

Select this option to open the detail setting for the photo display.
5.2.6.1 Slide Show Timing:
Choose from these options "Off, 2 Seconds, 5 Seconds, 10 Seconds, 30 Seconds, 1 Minutes and 2 Minutes". It decides the
waiting time before changing to the next photo while viewing photos.
5.2.6.2 Transition Effect:
Choose from these options "Off, Cross Fade, Left to Right, Top to Bottom, Waterfall, Snake, Dissolve, Strip Left Down and
All Effect Shuffle". It decides the transition effect for changing photos.

5.2.7 Subtitle

Select this option to open the detail setting for the subtitle display.
5.2.7.1 Subtitle Encoding
Select the encoding for subtitle file, file name and folder name display from Unicode (UTF8), Chinese Simplified (GBK),
Chinese Traditional (BIG5), Western (CP1252), Turkish (CP1254), Central European (CP1250), Greek (CP1253), Cyrillic
(CP1251), Hebrew (CP1255) and SE European (ISO 8859-16). Please select the right code to display or the garbage cha-
racters may appear on OSD.
5.2.7.2 Subtitle Font Size
Adjust the font size for the subtitle from -30 to 30. The default size is "0". If the format of font is "idx + sub" or it is the
subtitle in DVD Video/ISO/IFO, the font size option here won't be applied.
5.2.7.3 Subtitle Color
The default color is white for subtitle display and you can choose one of the other colors including red, yellow, green, blue
and black.
5.2.7.4 Subtitle Delay
If you find the display of external subtitle and the movie playback are not sync, you can increase or decrease the delay
for the subtitle display. Use the right/left key to choose the time from -2000 ms to 2000 ms. The negative value means to
show subtitle earlier and the positive value means to show the subtitle later.

5.2.8 Net

Setup the IP Address of the player for the network sharing.
5.2.8.1 Connection
Choose to use either onboard Ethernet or external Wireless LAN (optional USB WiFi dongle needed) to connect the
network. Only one interface is enabled at the same time. Both kinds of connection can use the network function on this
player.
21