Power On/Off; Menu Language; Hdd Format; Ready To Use - Icy Box IB-MP3012 series Manual

http://www.icybox.de
IB-MP3012 series
Media Player and DTV Receiver

3.7 Power on/off

Power on
After connecting the DC IN jack and press the power button on the front panel, the player will soon enter the home
screen, and the power indicator will turn blue.
Power off
Press the power button on the front panel, the player will soon enter standby mode, and the power indicator will turn red.
Then unplug the power cord to cut off the power supply.

3.8 Menu language

The system language of this player can be set to English or other languages. Change the language you wish in the setup
menu, the selected language will take effect immediately.

3.9 HDD format

For users who wish to install a new SATA HDD into the player, please refer to the following procedures to format the hard
disk on the player before usage.
Note: HDD format will remove all data stored on the hard disk drive. Please take care and backup your data in advance!
Step 1: Select OK on the Warning page, press ENTER to confirm.
Note: This page can be also accessed via Setup->System->HDD Format menu.
Step 2: Select Format, press ENTER, and then hard disk format will start.
The formatting procedure will be finished within a few minutes. And then you can use the hard disk properly on the player.

4. ReaDY To Use

4.1 setup Menu

When plug-in the power at the first time, the player shows the initial setup on screen. The initial setup will guide you
through the necessary settings for using this player. Use the direction key and the ENTER/RETURN key to operate.
*If you plan to use HDMI for display, make sure you connect the HDMI to TV and then begin the setup.
4.1.1 Menu Language
Select your language for the Menu.

4.1.2 Video System

Select the TV System for the device. For HDMI, you can select "HDMI Auto".

4.1.3 Aspect Ratio

Select the aspect ratio according to the TV set. For widescreen TV, select "16:9" or "16:10",
otherwise choose "Pan Scan 4:3" or "Letter Box 4:3".

4.1.4 TV Region

Choose your region in the region list for DTV. You can also choose "Don't Care" to continue.

4.1.5 Channel Scan

Select "OK" to scan or "Cancel" to scan later.

4.1.6 Time

Choose "Manual" to setup time manually or "Auto (via DTV)" to synchronize with DTV.
For manually setup, Year/Month/Day/Hour/Minute/Second are needed to setup.
For Auto, choose a DTV channel to synchronize.
16