2.SENDING A FAX
Original scanning range
The following figures show the original scanning area. Any information in the shaded area is not
printed on the paper.
Setting the transmission conditions
You can set the fax transmission conditions.
The transmission conditions are only applied to the current transmission. They return to
the default settings after the transmission.
Each default setting of resolution, original mode, exposure and ECM is adjustable.
P.98 "User Functions Menu Items"
Making settings
An example is explained below for [ORIGINAL MODE].
1
Press
:INPUT FAX NUMBER
01/01 12:01
100%
AUTO EXPOSURE
TEXT/PHOTO
2
Press
3
Press
ORIGINAL MODE
100%
TEXT
TEXT/PHOTO
PHOTO
Repeat step 2 and 3 as many times as needed.
4
Press [OK] to confirm the set value.
Feed
direction
2 mm
(0.08 inch)
or
to highlight the item to set.
1
A4
M:100%
to display the items in the lower hierarchies.
or
to select the value to set.
1
4
2 mm
(0.08 inch)
2 mm
(0.08 inch)
2 mm
(0.08 inch)
Basic Procedures
2 SENDING A FAX
31