Setting The Transmission Conditions - Toshiba e-studio 2802af Fax Manual

2 SENDING A FAX
 Original scanning range
The following figures show the original scanning area. Any information in the shaded area is not
printed on the paper.
 Setting the transmission conditions
You can set the fax transmission conditions.
 The transmission conditions are only applied to the current transmission. They return to
the default settings after the transmission.
 Each default setting of resolution, original mode, exposure and ECM is adjustable.
 P.101 "User Functions Menu Items"
 Making settings
An example is explained below for [ORIGINAL MODE].
1
Press
:INPUT FAX NUMBER
01/01 12:01
100%
AUTO EXPOSURE
TEXT/PHOTO
2
Press
3
Press
ORIGINAL MODE
100%
TEXT
TEXT/PHOTO
PHOTO
Repeat step 2 and 3 as many times as needed.
4
Press [OK] to confirm the set value.
32 Basic Procedures
2 mm
(0.08 inch)
or to highlight the item to set.
1
M:100%
A4
to display the items in the lower hierarchies.
or to select the value to set.
1
4
Feed
direction
2 mm
(0.08 inch)
2 mm
(0.08 inch)
2 mm
(0.08 inch)