2.USING THE FAX UNIT (BASIC OPERATION)
Setting the transmission conditions
You can set the fax transmission conditions.
The transmission conditions are only applied to the current transmission. They return to the default
settings after the transmission.
Refer to the MFP Management Guide to change the default values of each item.
Setting the original size
You can set the original size.
Press
in the Fax menu.
1
Select the original size and press [OK].
2
Original Size
Set the scan size of the original.
- Auto: The size of the original is automatically determined before the original is scanned.
- Different Width: Select this function to load the originals with different width into the ADF.
- Specified size: The original is scanned at the preset size regardless of its actual size.
If the recipient's fax machine is not capable of receiving originals of B5/B5-R size, this equipment
may reduce that size before sending it. To avoid this, when the original to be set is B5 and B5-R size,
specify A4 and A4-R size respectively.
Operating the Fax unit 33