2.SENDING/RECEIVING A FAX
Setting the transmission conditions
You can set the fax transmission conditions.
The transmission conditions are only applied to the current transmission. They return to the default
settings after the transmission.
Each default setting of resolution, original mode, exposure, transmission mode and ECM is adjustable.
P.100 "Fax settings"
Making settings
Pressing [OPTION] on the fax screen will display the transmission condition setting screen as shown below.
Set each setting item, and then press [OK].
Press
or
To cancel the operation and return to the previous screen, press [RESET].
to switch the pages.
2 SENDING/RECEIVING A FAX
Sending a Fax
29