Viewing Still Images - Canon HV20 Instruction Manual

~~-e
•••
Playback
II
Viewing Still Images
•
!Xl
III
VI
o'
"T1
l:
:::s
o
-
o '
:::s
VI
)1
+
• Avoid the following actions while the card
access display
~
01 appears on screen, and
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
I£:§]
/1Jj
switch or the operating mode .
• The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
You can jump ahead to a specific image
without having to browse all images one
byone.
To
RUN THROUGH THE STILL IMAGES
Image Jump
(QJ
10)
+
1
Holding the lock button pressed
down, set the
~
switch to
PLAY.
2
Move the
@3!l /
c:g
switch to
c:g
(memory card).
3
Select
(<OIl~
) the still image.
You can use the joystick to move
through the still images even if the
joystick guide above does not appear
on the screen.
Push the joystick (<OIl) or
(~
) and hold
it pressed down.
Release the joystick when the running
number gets to the number of the image
you want to display.
+