Viewing Still Images
To use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand
(
9).
camcorder). However, playback cannot be guaranteed for all still images.
To change the operating mode, refer to About the Operating Modes (
Use the multi selector (
between images.
Some still images may not be displayed correctly.
Avoid the following actions while the DISC access indicator is on or flashing.
Failing to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
Slideshow
(
35)
FUNC.
1. Press
2. Select (
3. Select (
• Images are played back one after another.
FUNC.
• Press
Index Screen
1. Move the zoom lever toward W.
The stills index screen appears with the first six still images.
2. Select (
• Move the cursor
+
• Press
3. Move the zoom lever toward T.
The index screen closes and the selected image is displayed.
Downloaded From VideoCamera-Manual.com Manuals
28
: You can view still images already recorded on a disc (with another
) to move
SLIDESHOW
.
) [
SLIDESHOW] and press (
) [START] and press (
to stop the slideshow.
,
) an image.
to the image you want to view.
–
or
to move to the next or previous index page.
) .
) .
9).
Multi selector