Canon HV20 Instruction Manual page 79

- - _ .. --e. . .
Connecting to a Printer
Erasing All Transfer Orders
[FUNc.
¢
I rE;3
MENU
•
m
><
CD
..,
::J
~
(")
o
::J
::J
C1l
o
-
o '
::J
til
I
Connecting to a Printer
Printing Still Images - Direct Print
The camcorder can be connected to any
PictBridge compatible printer. You can mark
the still images you want to print and set the
desired number of copies as a print order
(OJ 82).
Canon printers: SELPHY printers of the CP,
OS and ES series and PIXMA printers
marked with the PictBridge logo.
I f(
PictBridge
I
O-.IMPORTANT _
Connecting the Camcorder to the Printer
I
~Y·I
(CD 10)
1
Insert the memory card containing
the still images you want to print.
2
Turn on the printer.
3
Connect the camcorder to the
printer using the USB connection
-connection type II] (CD 75)- shown
in the previous section PC
Connection Diagrams.
• ::ill appears and changes to
Ill .
• The
,Q, ""
(print/share) button lights
up and the current print settings will be
displayed for approx. 6 seconds.
If ::ill continues to flash (for more than 1
minute) or if III does not appear, the camcorder
is not correctly connected to the printer. In such
case, disconnect the
USB
cable and turn
off
the
camcorder and the printer. After a short while,
turn them on again, set the camcorder to
1"P\.Ay,Qj:1 mode and restore the connection.
I
"!IV
I
(CD 10)
I
CARD OPERATIONS
I
TRANS.ORD.ALL ERASE
JJ.
[FONg
¢
I
§
TRANSFER ORDER
JJ.
Press ((§)
G'fO:
The image selection screen
appears
FROM THE IMAGE SELECTION SCREEN
1
Select ( ....
~
) the still image you
want to mark with a transfer order.
2
Press (~~ ) to set the transfer order.
A checkmark . / appears in the box
next to the transfer order symbol
§ .
Press
(@J )
again to cancel the
transfer order.
3
Repeat steps
1-2
to mark additional
images with transfer orders or
press
[FUNeJ
twice to close the
menu.
FUNC.
(CD
23)
• <§l,
will appear for images that cannot be
printed.