Viewing Still Images - Canon legria hv40 Instruction Manual

Viewing Still Images

1
Holding the lock button pressed
down, set the
PLAY.
2
Move the
(memory card).
3
Select (
You can use the joystick to move
through the still images even if the
joystick guide above does not appear
on the screen.
Downloaded From VideoCamera-Manual.com Manuals
switch to
switch to
/
) the still image.
IMPORTANT
Observe the following precautions while the
card access display
( 8)
and when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
switch or the operating mode.
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Image Jump
You can jump ahead to a specific image
without having to browse all images one
by one.
T
O RUN THROUGH THE STILL IMAGES
Push the joystick (
it pressed down.
Release the joystick when the running
number gets to the number of the image
you want to display.
Playback
31
appears on screen,
/
) or ( ) and hold