Canon HV20 Instruction Manual page 87

- - _... - - - •••• Trouble?
I
Memory Card Operation
Problem
Solution
CO
Memory card cannot be
Memory card was not facing the correct direction. Turn the
20
inserted.
memory card over and reinsert it.
Cannot record
on
the memory
Memory
card
is full. Erase still images to free some space or
64
card.
replace the memory card.
Memory card was not initialized. Initialize the memory card. 65
The folder and file numbers have reached their maximum value. 40
Set [FILE NOS.] to [RESET] and insert a new memory card.
Memory card cannot be played
Set the camcorder to I PLAy·[jj I.
33
back.
Image cannot be erased. Image is protected. Cancel the protection.
64
"OJ"
flashes in red. Card error occurred. Turn off the camcorder. Remove and
65
reinsert the memory card. Initialize the memory card if flashing
persists.
Printing
I
Problem
Solution
0
Cannot record with this
Set fAV" DV] to [OFF]. 39
camcorder video input from an
Wrong signal standard. Refer also to the instruction manual of -
external video device
the connected device.
connected to the HDV/DV
Dubbing may work using the AV/\) terminal.
terminal using a DV cable.
Problem
The printer is not operating
even though the camcorder
and printer are correctiy
connected.
Editing
Others
Problem
A rattling can be heard from the
camcorder.
Solution
Disconnect the USB cable and turn off the camcorder and the
printer. After a short while, turn them on again, set the
camcorder to I PLAN1l I mode and restore the connection.
Solution
The internal lens fixture can move when the camcorder is turned
off. This is not a malfunction.
»
0.
0.
;::;:
0'
:::l
!!!.
:::l
0-
3
III
-
O ·
:::l
-