Canon HV20 Instruction Manual page 41

" - - - - " - - - . - - ---- ••• Menu Options Lists
II
-
»
c.
<
III
::::l
o
(I)
C.
"11
l:
::::l
~
o'
::::l
til
I
• The camcorder will retain the audio
balance adjustment; however if you turn
off the camcorder, [AUDIO OUT] will be
reset to
[51-1
STERE01].
- ••••••••••11110.
When [AV/PHONES] is set to
[0
PHONES], adjust ( ....
~)
the volume
of the headphones with the joystick.
*
In
I
"LAy·rggJ
I
mode, adjust the volume
using the joystick guide (OJ 31).
I
CaMP-OUT '@
I
ICAIrAIICA!IlAIII··~y
I[ "cfl
[ g 480i], [R 1080i/480ij
You can select the video specifications to
use when connecting the camcorder to a
high-definition TV using the video
component connection.
[ g 480i]: To use the 480i specification
(standard definition).
[R 1080i/480i]: To use the full1080i high
definition specification when possible, or
switch automatically to 480i specification
when 1080i is not supported by the TV.
• Select the [PLAYBACK STDj and
[COMP.OUT] settings according to the
specifications you want to use for
playback on a high-definition TV. Refer to
the table below.
• When the playback standard selected is
different from that of the original recording,
no video will be output.
I~
[~
AVj,
[0
PHONES]
I
PHONES VOL.
~I
~I
~I
IOUTPUTCH
• This setting will be unavailable while
the camcorder is connected to an
external device using the HDMI cable.
[.I+[~ LlRj, [ . LlLj, [q R/R]
You can select the audio channel to use
during the playback of a tape with audio
recorded on two channels.
[ ••q LlR]: Left and Right channels
(stereo) / Main
+
Sub tracks (bilingual).
[ . LlL]: Left channel only (stereo) / Main
track only (bilingual).
[q R/R]: Right channel only (stereo) /
Sub track only (bilingual).
51-1 •
i
·5T-Z
When [AUDIO OUT] is set to [EB MIX/
VAR], adjust ( ....
~
)
th~
sound balance
with the joystick.
[SH STERE01j, [5H STERE02],
[1:1
MIX/FIXED], [EB MIXIVAR]
You can select the audio track to use
during the playback of a tape with audio
dubbed over the recording.
[51-1
STERE01]: Original sound only.
[51-2
STERE02]: Dubbed audio only.
[1:1
MIX/FIXED]: Mixed audio with the
original sound and dubbed audio at the
same level.
[EB MIXIVAR]: Mixed audio where the
balance between the original sound
(51-1)
and the dubbed audio (5H) can be
adjusted.
I
AUDIO OUT
I
MIX BALANCE