Viewing Still Images - Canon VIXIA HV30 Instruction Manual

-
O J
D)
tJ)
_.
(')
"T1
c::
~
(')
~
o
~
tJ)
+
Push the joystick ( .... ) or
(~)
and hold
it pressed down.
Release the joystick when the running
number gets to the number of the image
you want to display.
Image Jump
You can jump ahead to a specific image
without having to browse all images one
byone.
To
RUN THROUGH THE STILL IMAGES
. _ . .
~~~---=~~==~
•
• Observe the following precautions while the
card access display
~
[] appears on screen,
and when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
~ Ic:g
switch or the operating mode.
• The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
(QJ 10)
'1)
@§] ••
c:g
ce
---
..
3
Select ( .....
~
) the still image.
You can use the joystick to move
through the still images even if the
joystick guide above does not appear
on the screen.
1
Holding the lock button pressed
down, set the
IiD1Iii1
switch to
PLAY.
2
Move the ICJDI /
~
switch to
~
(memory card).
Viewing Still Images
- +