Canon HV20 Instruction Manual page 56

I
Still Image Recording Options ....---
NOTES
In the
[II
FIREWORKS] recording program the
focus priority is automatically set to
[rim
OFF].
FUNC.
(CO
23)
FUNC
WDNe
Icon of the currently selected
¢
Drive Mode
[DSINGlEj+
Records a single still image.
Mode switch: P (except for the
[BFIREWORKSj recording program).
Options
+
Default value
The camcorder records a still image in
three different exposures (dark, normal,
light in 1/2 EV steps), allowing you to
choose the shot you like the best.
• The speed and maximum number of
continuous shots is as follows.
-
[~
CONTSHOOT] Approx. 3 images/
second
- [ ~ HISPEED CONTSHOOT] Approx. 5
images/second
- Continuous Shooting with flash: Approx. 2.1
images/second
- Maximum number of shots:
60
still images
• These figures are approximate and vary with
the recording conditions and subjects.
• The actual number of images per second will
be lower when "~O~" (camcorder shake
warning) is displayed on the screen.
(FUNC.I
¢>\
Desired option
CONTINUOUS SHOOTING!
HIGH-SPEED CONTINUOUS SHOOTING
1
Press [PHOTO halfway to activate
the autofocus.
2
Press [PH0.IQ! fully and hold it
pressed down.
A series of still images will be
recorded as long as you hold the
button pressed down.
AUTO EXPOSURE BRACKETING
Press
[pHo-to],
first halfway to activate
the autofocus and then fully to record
the still image.
Three still images in different exposures
will be recorded on the memory card.
(OJ
10)
POINTS TO CHECK
ICA~RAII
Continuous Shooting and Exposure
Bracketing
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose later
the picture you like the best.