HYT TC-580 Service Manual page 56

2. Assemble the Chassis in the following steps:
1) Solder two speaker cables to the chassis with an electric iron;
2) Attach the rear cover in direction of
3) Insert the chassis into the front case in direction of
(Note: Place the waterproof ring in its place. And do not place the speaker cables over the
LCD.)
4) Secure the chassis with two screws in direction of
5) Install the antenna connector with sleeves in direction of
6) Secure the antenna connector with a screw using a screwdriver in direction of
7) Secure the antenna connector with a nut using sleeves in direction of
8) Attach a nut for the volume control knob with sleeves in direction of
9) Install the volume control knob in direction of
1
3. Then install the antenna, battery and belt clip one by one.
;
⑨
⑨ .
2
3
4
Figure 4
55
TC-580 Service Manual
, and then press the bottom of the chassis;
②
.
④
.
⑤
.
⑦
.
⑧
8
4
.
⑥
9
7
5
6