Table of Contents
Advertisement
Optional Equipment (for qualified installers only)
3
Install the liner following the directions below.
4
Replace the burner, logs, embers, glass and face.
© Travis Industries
(a) Tilt the liner
forward and at a
slight angle as you
insert it into the
firebox.
Place the bottom
left corner into the
firebox first.
(b) As you insert the
liner, make sure
the liner goes
behind the pilot
assembly.
(c) The top of the
liner will be very
tight along the top
– carefully rotate
and tilt the liner
into place.
(d) Once in the
firebox, pull the
liner forward so it is
against the front
flanges of the
firebox. Center the
liner from side to
side.
4060517
53
100-01158
Advertisement
Table of Contents
