Travis Industries 21 DV RV User Manual page 33

Glass Frame Removal and Installation (continued)
The spring pin can come loose from the latch assembly. This occurs when it is turned 1/4 turn
when it is disengaged. Follow the directions below to re-install the spring pin if it becomes loose.
NOTE: The spring pins
can be installed with the
glass frame in place or
removed.
© Travis Industries
Finalizing the Installation
4060517
To re-install the spring pin, first
insert this end into a 1/4" key.
Insert the spring pin into
this bracket with the pins
aligned vertically.
Push in slightly and
twist 1/4 turn.
With this pin horizontal, the
spring pin will remain in place.
33
100-01158