Dvd Jitter Adjustment - Pioneer XV-S100DV Service Manual

XV-S100DV

DVD Jitter Adjustment

2
• Playback method of inner and outer address for the purpose is refererd to "6.1.4 TEST MODE".
• Jitter indication of the monitor is refererd to "7.1.3 TEST MODE SCREEN DISPLAY".
START
• Test mode
• Play the DVD test disc
at outer track
(around #200000)
Turn the POWER OFF in
case of NG once, and
perform the adjustment
once again.
If error rate is OK,
locks a root of
tangential and radial
adjustment screws with
the Screw tight, and
!
go to step .
Screw tight : GYL1001
68
Mechanism Assy
Adjust the Tangential
Adjustment Screw so that
jitter becomes minimum.
Player
CHECK
Confirm the error rate that is
displayed "OK"
NG
(Example ER (av): 2.5e - 5-*OK )
Disc playback normally.
• The measurement of block error rate
ESC
Use disc: GGV1025
J4 : Min
J4 : Min
J4 : - - - -
Monitor
J4 : Min
5
• Play the DVD test disc
at inner track
(around #30000)
Mechanism Assy
Adjust the Radial
Adjustment Screw so that
jitter becomes minimum.
• Play the DVD test disc
at outer track
(around #200000)
Mechanism Assy
Readjust the Tangential
Adjustment Screw so that
jitter becomes minimum.
ESC
Test mode end