Mechanism Adjustment - Pioneer XV-S100DV Service Manual

6.1.5 MECHANISM ADJUSTMENT

Tangential and Radial Height Coarse Adjustment
1
START
• Remove the servo mechanism.
• Remove a Spacer for height adjustment
attached to the back side (shaded area)
of the Servo Mechanism (Float Base) with
nippers.
Servo Mechanism
Float Base
Spacer for Height adjustment
Note:
Turn the Short switch to Short side when
removing the Pickup Flexible Cable.
(Refer to "7.1.6 DISASSEMBLY".)
Cautions:
Because there is not a Spacer for height adjustment in
adjustment after the second time, will keep it at need.
(This parts is Traverse mechanism exclusive use of a model
for 2001 years)
Put a spacer between a Tangential (or Radial) adjustment
screw and Mechanism Base and turn each screw to adjust
the height. (Refer to "6.1.1 ADJUSTMENT ITEMS AND
LOCATION".)
Turn a flat side
into bottom
XV-S100DV
7.3mm
67