Test Mode Screen Display - Pioneer XV-S100DV Service Manual

7.1.3 TEST MODE SCREEN DISPLAY

TEST MODE SCREEN DISPLAY
When the test mode is entered, press the ESC button and the TEST button in order of the test mode remote control unit (GGF1067).
Consecutive double-OSD display is supported during test mode. The screen is composed 10 lines with a maximum of 32 characters per line.
It can't be used with the debugging display mode together.
• Screen Composition
(1) Address
(4) Background color
(5) Tracking status and
Laser diode current value
(6) Spindle status and
AFB status
(9) AGC setting
(11) FTS servo IC information
(12) C1 error value of
CD and DVD
(13) Internal operation mode
of the mechanism control
(14) Disc judgment and
CD 1/3 beam switch
(15) Equalizer value and
jitter value
Caution :
The first screen and second screen switch by pressing [DISPLAY]
key of the remote control unit.
It is only a version display part on the lower right of the screen
those contents of display change.
ATB : ON/OFF information display and AGC manual setting display
deleted with the second generation.
The displays of Tilt error value, Tilt servo status and pickup
DVD/CLD display deleted with the third generation becomes LD
part is deleted.
• Description of Each Item on the Display
(1) Address indication
The address being traced is displayed in number.
DVD : ID indication (hexadecimal number, 8 digits)
CD : A-TIME (min. sec.)
(Note : For DVDs, decimal-number indication is possible.)
(2) Code indication of the remote control unit [R – ∗ ∗ ∗ ∗]
The code for the key pressed on the remote control unit, which
is received by the FL controller, is displayed while the key is
pressed. In the case of the double code, the second code will
be displayed.
(3) Key code indication for the main unit [K – ∗ ∗ ]
The code for the key pressed on the main unit, which is
received by the system controller, is displayed while the key is
pressed.
(4) Background color indication [C – R∗ ∗ G∗ ∗ B∗ ∗]
(5) 1 Tracking status [TRKG – ∗∗∗]
Tracking on [ON ]
Tracking off [OFF]
2 Laser diode current value [LDI – ∗∗∗]
Character in bold : Item name
: Information display
Test Mode Screen Display
(First Screen Display)
[ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ]
[ 0 0 0 0 ∗ ∗ ∗ ∗ ]
(6) 1 Spindle status [SPDL – ∗ ∗ ∗]
Spindle accelerator and brake, free-runnimg
FG servo
Rough, velocity phase servo
Offset addition, rough, velocity phase servo
2 AFB status [AFB – ∗ ∗]
ON
OFF
(7) Mechanism position value [M – ∗]
Position code
(8) Slider position [S – ∗ ∗ ∗ ∗]
CD TOC area
CD active area
(9) AGC setting [AGC – ∗ ∗]
AGC on
AGC off
XV-S100DV
(2) Remote control code
(3) Key code
(7) Mechanism position value and
(8) slider position
(10) Output video system and
Skirt terminal output
(16) AV1 chip version
(17) FL controller version and
region setting for the player
(18) FL controller destination setting
(19) Port No. of Flash ROM and
system controller
(20) Flash ROM version and
Flash ROM size
(21) System controller revision
(22) DVD mechanism controller revision
(23) (Control and part No. of GUI-ROM)
[A/B]
[FG]
[SRV]
[O_S]
[ON ]
[OFF]
[1] to [3]
[IN ]
[CD ]
[AGC-ON]
[AGC-OFF]
73