Disassembly Of The Traverse Mechanism Assy And The Pickup Assy - Pioneer XV-S100DV Service Manual

XV-S100DV

Disassembly of the Traverse Mechanism Assy and the Pickup Assy

1
Remove the Tray Panel, Bonnet, Front Panel,
CONTROL Assy and Loading Mechanism Assy.
Remove the Bridge (Screw ×1).
2
3
Pull out the Tray and remove it while unhooking a Hook.
4
Turn the Short SW to Short side.
5
Remove four connectors.
3
-1
Hook
Bridge
5
3
-2
RearView
DVDM Assy
Side
Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark
of the Loading Base and a position of pin of the Drive Cam.
Pin
84
2
-1
× 3
5
2
-2
Short Open
4
Short SW
Loading Base
Triangle mark
Drive Cam
6 Remove the DVDM Assy (Screws ×2).
7
Remove a screw.
Cautions:
Screw is locked with Silicone Bond.
Please lock it with Silicone Bond when installs it.
8
Remove the FFC Holder with the state which Flexible Cable
was atatched.
Traverse Mechanism
Assy
FFC
Holder
Bottom View
Pickup Assy
When Removing The Traverse Mechanism Assy
9
Remove the Pickup Flexible Cable
Unhook ( ×4)
10
11
Remove the Traverse Mechanism Assy
11
9
× 2
10
Exchange
Silicone Adhesive
7
GEM1037
8
× 2
10
Traverse Mechanism
Assy