Advertisement
>
Menu
Purpose
Choices
Default
*
Menu
Purpose
Choices
Default
/
+@!
+%
To check image alignment, print a standard status page. When the printer is placing
images properly, the alignment angle bar in the lower-left corner of the status page is
0.5"/12.7 mm from the left and bottom edges of the page. If the angle bar is off, use
the Administration/Engine/Image Alignment menu to align the image horizontally and
vertically in pixel increments (1/300" or 0.08 mm).
»
Note: Engine constraints may limit the accuracy of pixel alignment.
<> %.
Menu
Purpose
Choices
Default
Notes
!
Administration/Emulations/Line Printer/Point Sz 100ths
Sets the five-digit value used to specify the point size of the font for the current
print job.
00000-99999
00880 (8.8 points)
Administration/Emulations/Lineprinter/Tab Stops
Specifies the number of spaces between tab stops.
000-256
008
Administration/Engine/Image Alignment/Horiz Offset
Adjusts the horizontal placement of the image on the page.
000-300 (0.00"/0 mm-1.00"/25.4 mm)
100 (0.33"/.84 mm)
Values above 100 move the image to the right.
Values below 100 move the image to the left.
/
"$
Advertisement
