Advertisement
/!%
>
0
Menu
Purpose
Choices
Default
Notes
Menu
Purpose
Choices
"&&
Administration/Emulations/PCL5e/Point Size x100
Sets the point size for scalable default fonts increments of .01 point. For example,
a 24 point default point size is selected by entering 2400. The smallest increment
allowed in point size is .25 point. For example, 8.5 point and 8.75 point fonts are
allowed, but 8.6 point is not.
00025-99975 (0.25-999.75 points)
01200 (12 points)
If the font is not scalable or if a bitmap font is specified, the setting is ignored.
Administration/Emulations/PCL5e/Retain Temporary
Allows you to control the PCL 5e print environment across print jobs.
On —Resets PCL to its default state at the end of each PCL print job. Temporary
fonts, macros, and patterns from previous PCL jobs are retained in memory
after the print job has completed. You can recall these downloaded fonts,
macros, or patterns from within your PCL file without having to download
them again.
Off —Resets PCL to its default state at the end of each PCL print job, executes
an implicit <ESC>E at the start and end of the job, and deletes any temporary
fonts, macros, and patterns.
On Compatibility —Retains the entire state of PCL as well as the temporary
macros, fonts, and patterns from previous PCL jobs when jobs of other
emulations are printed between PCL jobs.
Advertisement
