Advertisement
'
!
Level 2 Windows driver or an Apple LaserWriter driver. However, comparable drivers
may not allow you to access all of your printer's features.
2 ,'
-!
.
QMS Document Option Commands (DOCs) can enable job-specific features your
application or page description language can't access. See your QMS Crown Docu-
ment Option Commands manual (shipped with your printer) for information on the
DOC commands. See appendix C, "Document Option Commands," of this manual
for a list of DOCs this printer supports.
2
%
%
Your printer is configured at the factory for most typical printing environments so most
users don't have to use the control panel often. However, if you need to change a
printer setting for all print jobs (not just on a per-job basis), you can do so through the
control panel. If you're working in a shared printing environment, your system adminis-
trator should be the only person to make changes through the printer's control panel.
2
%
Many of the configuration choices that can be made at the control panel can also be
made via a Remote Console session from CrownAdmin. You can run Remote Console
via Telnet in an UNIX environment. To avoid confusion in a shared printing environ-
ment, only the system administrator should make configuration changes. See the
QMS CrownAdmin online help for information on using Remote Console.
»
Note: If a remote console has the printer off line, pressing the Online key will not take
effect until the console puts the printer back on line.
2 34
3
Many of the configuration choices that can be made at the control panel can also be
made via CrownView. See the QMS CrownView online help for information.
"&
Advertisement
