Advertisement
/
%%
Toner
Warm-up time
Input sources
Output
!*%
8
/0
The stated life expectancy of each consumable is based on printing under specific
operating conditions, such as media type, number of color planes, page size, and
page coverage (usually 5% coverage of letter/A4-size media). The actual life expect-
ancy will vary depending on these and other printing variables, including continuous or
intermittent printing, ambient temperature, and humidity.
»
Note: Consumables for the magicolor 6100 Print System Print System are available
from your local vendor. See appendix A, "QMS Customer Support," for a list of
locations and telephone numbers.
Cleaning roller
Fuser oil
Fuser unit
OPC belt cartridge
Toner cartridges
(QMS toner
cartridges only)
Type: Microfine, dry, single component
Packaging: User-replaceable cartridges
» Note: Keyed toner cartridges are available from your local vendor. See
appendix A, "QMS Customer Support," for a list of locations and
telephone numbers.
Maximum: 210 seconds
Typical: 180 seconds from power on, assuming normal temperature and
humidity
Standard: 250-sheet cassette
Optional: 500-sheet lower input feeder
»
Note: Up to 2 lower input feeders may be installed.
250-sheet tray on top of printer
20,000 pages** at 5% coverage of each color
12,000 pages** Fuser oil bottle life is media dependent: coarser paper
requires more oil
100,000 pages** maximum at an equal mix of black and 4-color pages, all
with 5% coverage of each color. Fuser life is media dependent.
Maximum120,000 planes* (usually occurs with continuous use;
life — 60,000 planes, may occur with job sizes averaging one page
although other factors also affect cartridge life.
Black
14,000 pages* per cartridge @ 5% coverage
Yellow
8,500 pages* per cartridge @ 5% coverage
Magenta
8,500 pages* per cartridge @ 5% coverage
Cyan
8,500 pages* per cartridge @ 5% coverage
minimum
Advertisement
