Advertisement
%
!
Menu
Purpose
Choices
Default
-
Menu
Purpose
Choices
Default
/9*'
Menu
Purpose
Choices
Default
Notes
-
!% 9*
Menu
Purpose
Choices
Default
Notes
!
Administration/Communications/Parallel/Spool Timeout
Sets the number of seconds the parallel interface waits for data from the host
before terminating a spooled print job.
00000-99999 (sec.)
00030 (sec.)
Administration/Communications/Parallel/Data Bits
Sets the number of data bits transmitted per character.
7 Bits, 8 Bits
8 Bits
Administration/Communications/Parallel/End Job Mode
Enables (and identifies an end-of-job sequence) or disables data stream sensing
for the end-of-document (EOD) command.
None —The printer recognizes only the PostScript ^D command.
QMS EOD —The printer recognizes only the QMS %%EndOfDocument
command.
HP EOD —The printer recognizes only the HP <ESC>%12345X command.
None
See chapter 3, "Technical Information," for details on how to implement this
feature.
Administration/Communications/Parallel/Def Job Prio
Allows you to specify which jobs are printed first, according to the interface
through which they're received, when jobs are received simultaneously.
001-100 (highest-lowest priority)
001 (highest priority)
For example, you can give jobs received via the parallel interface priority over
jobs received via the Ethernet interface.
!
""
Advertisement
