Advertisement
Notes
+! 9*(%
Menu
Purpose
Choices
Default
!
If this operation is selected when accounting is disabled, the files are removed but
not recreated, thus saving disk space.
This operation is also available as the resetaccount command for the admin user
at a remote console. (See the Remote Console User's Guide for more
information.)
When job files are more than 80% full but less than 100% full, the following
message displays on the control panel and remote console:
xxxxxxxx FILE xxx% FULL
( xxx% is the percentage full, reported as 80%, 85%, 90%, or 95%.) This is an
appropriate time to transfer them to your host computer using ftp if it is available
to you. Then use the option to reset the accounting files to empty after they have
been transferred to the host.
When the file is 100% full, the
xxx FILE IS FULL
message displays.
When accounting is enabled and the job accounting files are 100% full, no further
print jobs are accepted by the printer until Resetaccounting is selected or until
accounting is disabled. If you disable accounting at this time, no job information is
stored. You can retrieve your accounting files while they are full and then do the
Resetaccounting operation. However, to avoid delaying jobs being sent to the
printer, it is advisable to perform the retrieve/reset operations before the job
accounting files fill up.
Operator Control/Accounting/File Segment
Allows you to specify whether accounting information is stored in the printer in a
single file or in multiple files.
Single, Multiple
Multiple
+!
"5
Advertisement
