Setting The Smb Protocol - Toshiba E-STUDIO 350 User Functions Manual

3.SETTING NETWORK FUNCTIONS (Cont.)

Setting the SMB Protocol

When you want to enable this equipment visible in the Windows network, you must enable the SMB protocol
and enter the NetBIOS name and workgroup to specify the device name of this equipment and workgroup
where this equipment will be visible.
Also if your network uses the WINS server to allow the SMB communication across the segments, you must
specify the WINS server address, so that this equipment will be visible from the different segment.
This must be enabled for SMB printing, Save as file to the network folder using SMB, and sharing the
"FILE_SHARE" folder (that is the local folder of this equipment) in the network.
1
Press the [NETWORK] button in the
ADMIN menu.
4
- The NETWORK menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press the [SMB] button.
- The SMB screen is displayed.
100
4.SETTING ITEMS (ADMIN)