Pump Output - Lauda RE 104 Operating Instructions Manual

Starting up
6.4.2

Pump output

13.04.99
YACE0059
and 1x
or
− Switch from the actual value display to pump output by
pressing the key combination shown on the left or
− move forward from "Refrigeration system" with this key
− Display shows P and actual pump output step 1...5.
− Press the key ! display flashes (approx. 4 s).
− During this time start to set the required step with one of the
keys.
0 = pump stopped, heating off
1 = low pump output
2 , 3 , 4 = medium pump output
5 = maximum pump output
− The pump responds immediately (can be heard). (Setting is
entered after approx. 4 s
− Move forward with key to "User calibration" or
− Back with the key to "Refrigeration system".
Section 6.4.)
15