Visonic PowerMaxExpress Installer's Manual page 20

Note: In the single acknowledge mode, receiving an
acknowledge signal from a single telephone is sufficient to
consider the current event closed and call off the
communication session. The remaining telephones serve for
backup purposes only. In the all acknowledge mode, an
acknowledge signal must be received from each telephone
before the current event is considered reported.
The options are: single ack and all ack.
SMS Report Tel# [Fig 4.5.4(3)]
st
1 SMS Tel# [Fig 4.5.4(3a)]
Here you define the first SMS phone number (including
area code, 16 digits maximum) to which pre-selected
event types (see par. 4.6.3) will be reported.
nd
2 SMS Tel# [Fig 4.5.4(3b)]
Note
The currently saved options are
displayed with dark box at the
right side of the display. To
review the options, repeatedly
click or
until the desired option is
displayed, then click OK (a dark
box will be displayed at the right
side).
Note
The currently saved options are
displayed with dark box at the
right side of the display. To
review the options, repeatedly
click or
until the desired option is
displayed, then click OK (a dark
box will be displayed at the right
side).
20
Refer to Figure 4.1a
to gain access to
USER SETTINGS
menu
USER SETTING
INSTALLER MODE
ENTER CODE
[installer code]
1. NEW INSTL CODE
2. ENROLLING
3. DEFINE ZONES
4. DEFINE PANEL
5. DEFINE COMM.
<OK> TO EXIT
Figure 4.5 – Defining Communications
FIGURE 4.5 - DETAIL A
1: PSTN / GSM
4.5.1(1)
AREA CODE
xxxx
(Enter tel. area code)
FIGURE 4.5 - DETAIL B
2: GPRS/BB
4.5.2(1)
GPRS REPORT
disable disable
enable enable
Par. 4.5.2(5)
GPRS USERNAME
xxxx... (up to 30 digits)
(Enter GPRS
username)
Here you define the second SMS phone number (including
area code, 16 digits maximum) to which pre-selected
event types (see par. 4.6.3) will be reported.
rd
3 SMS Tel# [Fig 4.5.4(3c)]
Here you define the third SMS phone number (including
area code, 16 digits maximum) to which pre-selected
event types (see par. 4.6.3) will be reported.
th
4 SMS Tel# [Fig 4.5.4(3d)]
Here you define the fourth SMS phone number (including
area code, 16 digits maximum) to which pre-selected
event types (see par. 4.6.3) will be reported.
1: PSTN / GSM
2: GPRS / BB
3: C.S. REPORTING
4: PRIVATE REPORT
Par. 4.5.1(2)
LINE PREFIX
xxxx
(Enter prefix)
Par. 4.5.2(2)
GSM REPORT
disable
enable
Par. 4.5.2(6)
SIM PIN CODE
GPRS PASSWORD
xxxx... (up to 16 digits)
(Enter GPRS
password)
see detail A
see detail B
see detail C
see detail D
Par. 4.5.1(3)
DIAL METHOD
tone (dtmf)
pulse
Par. 4.5.2(3)
SMS REPORT
(Enter name of APN)
Par. 4.5.2(8)
FORCE HOME NETW.
xxxx...(up to 16 digits)
disable
(Enter SIM card
enable
PIN code)
Par. 4.5.1(4)
GSM KEEP ALIVE
disable
every 28 days
Par. 4.5.2(4)
GPRS APN
xxxx...(up to 40 digits)
Par. 4.5.2(9)
D-302017