KitchenAid electric dryer Installation Instructions page 5

When moving your dryer...
l
Shut off electric supply to dryer.
l
Disconnect electrical cord and tape
securely to dryer.
l
Tape the drum to the front panel.
l
Tape the dryer door and lint screen.
l
Screw leveling legs all the way in.
Before having your electric dryer
installed in your new home, check with
a licensed electrician to confirm that
the supply voltage matches the voltage
specified on the nameplate.
art No. 3389704 Rev. 0
KitchenAid Inc. 1990
Prepared by KItchenAid. St. Joseph, Michigan 49085
If dryer does not operate
properly...
If dryer will not operate, check the
following to be sure that:
A. Electric supply is connected.
B. Fuse is intact and tight.
C. Door is closed.
D. Controls are set in a running or
"On" position.
E. Start button has been pushed
firmly or the power control level
moved upward to start.
Printed in U.S.A