Sound Settings; Screen Settings - Husqvarna Viking Designer Ruby Deluxe User Manual

soUnd seTTings

You can change the Sound Settings on your machine to
alert you at a variety of situations. Select which sound
function you want to change. Then select the sound you
want to play by touching the icon. You will be able to hear
a preview of the sound when you touch the sound icon.
Each alert function can have a different sound. Close the
pop-up with the OK icon.
audio repeat
When active, the signal for some warning alerts or attention
pop-up messages is repeated in intervals until it is cancelled.
volume
You can change the volume using the slider bar. All sounds
settings will be affected if the volume setting is changed.

sCreen seTTings

Touch screen adjust
When touching the icons on the screen, the screen might
need calibration to adjust to your touch.
Touch to open a view for calibrating the touch screen.
Follow the instructions on the screen to calibrate the
screen.
lock screen
If there is the possibility of bumping the Large Interactive
Screen and changing the stitch or settings while sewing, it is
easy to lock the screen.
When activated, the screen is automatically locked
everytime it is inactive for ten seconds. A pop-up is shown
on the screen and will remain locked until you touch OK
on the pop-up.
screen saver
When activated, the screen shows the startup screen ten
minutes after the last touch. Touch the screen or press any
button to activate the screen again.
S & F 3:11
ettingS unctionS