Memory Card; Edge Storage Tab - Setting The Edge Storage Movie And Still Image Function; Recording Data - Sony Ipela SNC-WR630 User Manual

Edge Storage Tab — Setting the
Edge Storage movie and still image
function
With Edge Storage, video or audio signal can be
recorded from the alarm detection results, such as
network block, recorded video and audio can be
streamed with the same protocol as the real-time
streaming.
Notes
• The frame rate and operability on the viewer may be
reduced during movie or still image recording.
• The actual interval of recording a still image may be
longer than the interval you set.
• Stop the Edge Storage recording before you turn off
the power of the camera with a memory card inserted.
• Before you remove or insert a memory card, stop the
Edge Storage recording and turn off the power of the
camera.
• Before using a memory card, format it by Format
memory card in the Initialize tab of the System menu
(page 24).
• A maximum of 4000 movie records can be saved to an
memory card. If the checkbox of Overwrite is not
selected when the number of records reaches 4000,
new recordings cannot be made. If the checkbox of
Overwrite is selected when the number of records
reaches 4000, the unit will begin to overwrite old
records in ascending chronological order.
• Overwrite is not available for a memory card of less
than 4 GB.
• When recording H.264, the recorded data may
become very large and the video/audio may be
interrupted if the Adaptive rate control is set and other
image codec except CBR is selected. Therefore,
selecting CBR is recommended.
If you select CBR, set the video codec as follows:
– Set the Bit rate below 2000 kbps.
– Set the Frame rate below 30 fps.
– Set the I-picture interval to 1 second.
• When you record the JPEG with image size 1280 ×
720 or above, set the video codec as follows:
– SNC-WR630/WR632: Set the Image quality below
2.
– SNC-WR600/WR602: Set the Image quality below
5.
– Set the Frame rate to 1 fps.
• When you record, set the Image codec 2 and Image
codec 3 of the Video codec tab in the Video / Audio
menu to Off.
Common setting

Memory card

Display the available free space of external memory.
Maintenance information
Displays the status of the memory card if you are using
the memory card that corresponds to displaying
Maintenance information.
Overwrite
Select On to overwrite the file when there is insufficient
memory space.
When you select the checkbox, overwrite is enabled.
Old records will be overwritten in chronological order.
When you deselect the checkbox, overwrite is
prohibited, and no recording will be performed.
Note
Records are overwritten in chronological order,
regardless of whether they are movies or still images.
Edge Storage still image

Recording data

You can refer to still image files recorded in the memory
card. These files will be saved in a folder tree as follows.
/sdcard/EdgeStoragePicture/00000000-999999999/
00000000-99999999/
(Prefix)YYYYMMDDhhmmss00000001.jpg
Setting the Action output — Action output Menu
59