Audio Tab; Superimpose Tab; Audio Upload; Audio Sending - Sony Ipela SNC-WR630 User Manual

Maximum bit rate limit
Enable the check box when Bit rate compression mode
is set to VBR, to set the maximum value of the bit rate.
Max: Set the maximum value of the bit rate when the
camera is operated with VBR.
Accept frame skip: If you enable the checkbox, the
frame skip will be allowed for bit rate control.
Min, Max
Set the maximum and minimum bit rates that are
adjusted with the adaptive rate mode when Bit rate
compression mode is set to Adaptive rate control.
Image quality
If you set Image codec to JPEG, or Bit rate
compression mode to VBR when Image codec is set to
H.264, the image quality setting will be enabled.
Selectable values are from 1 to 10. When 10 is selected,
the best image quality is achieved.
Bandwidth control
Limits the network bandwidth for the JPEG image data
output from the camera when you set Image codec to
JPEG.
Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth. This
function is not available when the setting is set to 0.
OK/Cancel
See "Buttons common to every menu" on page 21.

Audio Tab

Audio sending

Make settings for sending audio from the m
microphone input connector.
Enable
Select the checkbox if you want to send audio from the
network camera.
28
Setting the Camera Image and Audio — Video / Audio Menu
Note
When you change the Audio setting, click Refresh on
the Web browser to reflect the change on the opening
live viewer page.
Audio in
Select microphone input or line input.
Mic volume
When the Audio in is set to microphone input, set the
volume level of the audio input from the m microphone
input connector. It is adjustable from –10 to +10.
Audio codec
Select the codec type of audio from the m microphone
input connector. The bit rate may differ, depending on
the codec type.
Note
No audio is output if the Plug-in free viewer is used.

Audio upload

Using the SNC audio upload tool, you can output audio
that is input to the computer's audio input terminal from
a powered speaker connected to the line output jack of
the camera.
Enable
Select the checkbox to enable the audio upload function.
Volume
Set the speaker volume level from –10 to +10.
OK/Cancel
See "Buttons common to every menu" on page 21.

Superimpose Tab

Select whether or not to superimpose the custom string
and the character date & time on the image.