Configuring The Network - Network Menu; Network Tab - Sony Ipela SNC-WR630 User Manual

At the 0 setting, time out of the Keep-Alive command is
not available.
OK/Cancel
See "Buttons common to every menu" on page 21.
Configuring the Network
— Network Menu
When you click Network in the Administrator menu, the
Network menu appears.
Use this menu to configure the network to connect the
camera and the computer.
The Network menu consists of the Network and QOS
tabs.

Network Tab

This section provides the menus for connecting the
camera through the network cable.
Status
MAC address
Displays the MAC address of the camera.
Ethernet status
Displays the current transmission rate.
Auto-MDI/MDIX
According to the port of the connected Ethernet
device, automatically switches the port of the unit
between MDI and MDI-X for transmission.
Displays the Ethernet port mode of the unit.
Configuring the Network — Network Menu
33