Setting The Action Output - Action Output Menu; Execution Condition Tab; Mail Transfer Tab - Setting The E-Mail (Smtp) Function - Sony Ipela SNC-WR630 User Manual

Setting the Action
output
— Action output
Menu
Action output
When you click
menu, the Action output menu appears.
The Action output menu consists of the Execution
Condition, Mail Transfer, Alarm output, Edge
Storage, Voice alert, HTTP alarm notification and
FTP still image sending tabs.

Execution Condition Tab

Set execute conditions for each action.
Set the action output execute conditions when the
condition created in the Event condition tab is
implemented.
Mail Transfer: Set the condition of mail transfer.
Alarm output 1: Set the condition to control alarm
output of the I/O port on the rear of the camera.
Alarm output 2: Set the condition to control alarm
output of the I/O port on the rear of the camera.
Edge Storage movie: Set the condition to record
movies using the Edge Storage function.
Edge Storage still image: Set the condition to record
still images using the Edge Storage function.
Voice alert 1: Set the condition of Voice alert 1 recorded
in the camera.
Voice alert 2: Set the condition of Voice alert 2 recorded
in the camera.
Voice alert 3: Set the condition of Voice alert 3 recorded
in the camera.
Preset call: Set the condition of preset call and the
preset call number.
HTTP alarm notification 1: Set the condition for the
HTTP alarm notification to recipient 1.
HTTP alarm notification 2: Set the condition for the
HTTP alarm notification to recipient 2.
HTTP alarm notification 3: Set the condition for the
HTTP alarm notification to recipient 3.
FTP still image sending: Set the condition for sending
with the FTP still image sending function.
56
Setting the Action output — Action output Menu
in the Administrator
Mail Transfer Tab — Setting the
e-Mail (SMTP) Function
SMTP Server
Notes
• You cannot send an audio file by using the e-mail
sending function.
• The frame rate and operability on the viewer may be
reduced while a file is being transmitted by the e-Mail
(SMTP) function.
SMTP server name
Type the SMTP server name using up to 64 characters,
or the IP address of the SMTP server.
SMTP port number
Enter a port number from 25 or 1024 to 65535.
The standard port number is 25.
Authentication
Select whether authentication is required when you send
an e-mail.
None: No authentication is required when an e-mail is
sent.
SMTP: Select when SMTP authentication is required.