Audio Tab; Superimpose Tab; Audio Sending; Mic Volume - Sony Ipela SNC-CX600W User Manual

Auto rate control
Select the checkbox to enable automatically adjusting
the most suitable bitrate for video playback. This setting
is recommended in the case of unstable network
connection or wireless network interference.
You can set the codec individually for Video 1, Video 2
and Video 3.
Perform the following before setting the auto rate
control.
• Set the video codec as follows.
– Set the Image codec to H.264.
– Set the CBR to Off.
Minimum: Set the minimum bitrate for auto rate
control.
Maximum: Set the maximum bitrate for auto rate
control.
• Set the connection method of the live viewer screen to
Unicast. (See "Switching Transmission Mode" in
"Operating the Camera" on page 15.)
Notes
• The transmission frame rate or bitrate may differ from
the rate you set depending on the image size, scene or
network environment, etc.
• Auto rate control is not available when Plug-in free
viewer is used.
Bit rate
Set the bit rate of H.264 image transmission for a line,
when the CBR function is on. When the bit rate is set to
a high level, better image quality can be enjoyed.
When you use a Wi-Fi network, we recommend setting
the bit rate below 2000 kbps.

Image quality

The image setting is available when you set the video
codec to JPEG or H.264 with the VBR function On
(selecting Off in the CBR drop-down list).
Selectable values are from 1 to 10.
When 10 is selected, the best image quality is achieved.
The number that can be selected will be different
depending on the setting.
Bandwidth control
Limits the network bandwidth for the JPEG image data
output from the camera.
Note
Audio may be interrupted depending on the selected
bandwidth. In this case, select a wider bandwidth. This
function is not available when the setting is set to 0.
OK/Cancel
See "Buttons common to every menu" on page 19.

Audio Tab

Audio sending

Make settings for sending audio from the microphone.
Enable
Select the checkbox if you want to send audio from the
network camera.
Note
When you change the Audio setting, click Refresh on
the Web browser to reflect the change on the opening
live viewer page.

Mic volume

Set the volume level of the audio input from the
microphone. It is adjustable from –10 to +10.
Audio codec
Select the codec type of audio from the microphone. The
bit rate may differ, depending on the codec type.
Note
No audio is output if the Plug-in free viewer is used.

Audio upload

Using SNC audio upload tool, you can output audio that
is input to the computer's audio input terminal from a
powered speaker of the camera.
Enable
Select the checkbox to enable the audio upload function.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See "Buttons common to every menu" on page 19.

Superimpose Tab

Select whether or not to superimpose the custom string
and the character date & time on the image.
Notes
• For setting the superimposing, set Image size1 in the
Video codec tab of the Video / Audio menu to the
maximum rate.
• Deselect the checkbox of Stabilizer in the Installation
tab of the System menu. After setting superimpose, set
the Stabilizer function again.
Setting the Camera Image and Audio — Video / Audio Menu
25