Specifying settings from the control panel
To specify the total counter report settings
1
In the Administrator Setting screen, touch [5 Network Setting].
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [4 Total Counter Report Setting].
The Total Counter Report Setting screen appears.
4
Specify the desired settings.
5
Touch [Close].
Note
To display the Administrator Setting screen, refer to "To display the
administrator setting screen" on page 4-10.
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
bizhub C450 (Phase3)
4
4-131