Settings For Using Network/Scanning Functions; Specifying Network Settings - Konica Minolta bizhub C450 Network Scanner Operations

Before using the scan functions
2.3

Settings for using network/scanning functions

It is recommended that the settings described below be specified before
using the network/scanning functions. The network settings described in
"Specifying Network Settings" must be specified first. Set other items as
necessary.
!
Detail
For details on specifying network settings, refer to the chapters listed
below.
"TCP/IP settings" on page 4-59
"E-mail TX (SMTP) settings" on page 4-106
"5 Specifying settings Using PageScope Web Connection"

Specifying network settings

An IP address must be assigned to the machine and settings such as the
SMTP server must be specified to use the machine on the network. Be sure
to set them.
There are two methods for specifying settings. One method is to specify the
settings from the touch panel of this machine. The other method is to use
PageScope Web Connection from a Web browser on a computer on the
network.
bizhub C450 (Phase3)
2
2-9