Wlan Internet Access Points - Nokia 5800 XpressMusic User Manual

Connectivity
service provider. To obtain these addresses, contact
your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
proxy server.

WLAN internet access points

Select Menu Settings
>
Destinations Access
>
instructions on the screen.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups and select an access point marked
with .
Follow the instructions from your WLAN service provider.
WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode and WLAN security
mode are determined by the settings of its access point
device.
Network status — Define whether the network name
●
is displayed.
WLAN network mode
●
ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is not
needed. In an ad hoc network, all devices must use the
same WLAN network name.
WLAN security mode
●
WEP, 802.1x (not for ad hoc networks), or
WPA2. If you select Open
70
— Enter the address of the
— Enter the port number of the
and Connectivity
>
point, and follow the
— Select Enter manually
— Select Ad-hoc to create an
— Select the encryption used:
WPA/
network, no encryption is
used. The WEP, 802.1x, and WPA functions can be used
only if the network supports them.
Homepage — Enter the web address of the starting
●
page.
Use access point
●
want the device to ask for confirmation before the
connection using this access point is created or
Automatically
destination using this access point automatically.
To enter the settings for the selected security mode, select
WLAN security settings.
Security settings for WEP
WEP key in use
●
(WEP) key number. You can create up to four WEP keys.
The same settings must be entered on the WLAN access
point device.
or
Authentication type
●
authentication type between your device and the
WLAN access point device.
WEP key settings
●
of the key), WEP key format (ASCII
and WEP key (the WEP key data in the selected format).
Security settings for 802.1x and WPA/WPA2
WPA/WPA2 — Select the means of authentication:
●
EAP to use an extensible authentication protocol (EAP)
plug-in, or Pre-shared key
Complete the appropriate settings:
— Select After confirmation
if you want the device to connect to the
— Select the wired equivalent privacy
— Select Open or
— Enter WEP encryption
or Hexadecimal),
to use a password.
© 2009 Nokia. All rights reserved.
if you
Shared for the
(length