Nokia 5800 XpressMusic User Manual page 214

Q: Why can't I see a wireless LAN (WLAN) access
point even though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created
a WLAN internet access point for the network on your
Nokia device.
Q: How do I turn the wireless LAN (WLAN) off on
my Nokia device?
A: The WLAN on your Nokia device deactivates when you
are not connected or trying to connect to another access
point, or not scanning for available networks. To further
reduce battery consumption, you can specify that your
Nokia device does not scan, or scans less often, for
available networks in the background. The WLAN
deactivates in between background scans.
To change the background scan settings, do the following:
1. Select Menu Settings
>
Wireless LAN Options
>
2. To increase the background scan time interval, adjust
the time in Scan for
scans, select Options
availability > Never.
3. To save your changes, select Back.
When Show WLAN availability
WLAN availability icon is not displayed in the home
screen. However, you can still manually scan for
© 2009 Nokia. All rights reserved.
and Connectivity
>
> Settings.
networks. To stop background
Settings Show WLAN
> >
is set to Never, the
available WLAN networks, and connect to WLAN
networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If
to perform operation. Delete some data first.
Memory low. Delete some data from phone
memory. is displayed when you are deleting several
items at the same time, delete items one by one,
beginning with the smallest items.
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number,
address, or e-mail address. Select
the relevant contact, and edit the contact card.
Q: How can I end the data connection when the
device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop
the device from making a data connection, select
Messaging and Options
message Multimedia
>
have the multimedia messaging centre save messages to
be retrieved later, or Off
multimedia messages. If you select Manual, you receive
a notification when you have a new message in the
multimedia message centre. If you select Off, the device
does not make any network connections related to
multimedia messaging. To set the device to use a packet
data connection only if you start an application or action
Troubleshooting
Not enough memory
Menu Contacts
>
Menu
Settings Multimedia
> >
retrieval. Select Manual
to ignore all incoming
or
and
>
to
101