Make Calls; Proximity Sensor; Voice Calls; During A Call - Nokia 5800 XpressMusic User Manual

4. Make calls

Proximity sensor

Your device has a proximity sensor. To prevent accidental
selections, the touch screen is disabled automatically
during calls when you place the device next to your ear.
Do not cover the proximity sensor,
for example, with protective film or
tape.

Voice calls

1. In the home screen, select
enter the phone number, including the area code. To
remove a number, select C.
For international calls, select * twice for the + character
(which replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if another
application is active.
To make a call from the contacts list, select
Contacts. Scroll to the desired name. Or, tap the search
field to enter the first letters or characters of the name,
© 2009 Nokia. All rights reserved.
to open the dialler, and
Menu
>
and scroll to the name. To call the contact, press the call
key. If you have saved several numbers for a contact, select
the desired number from the list, and press the call key.

During a call

To mute or unmute the microphone, select
To put a call on hold or activate the held call, select
or .
To switch back to the handset, select
To end the call, select
To switch between the active and held calls, select
Options > Swap.
Tip: When you have only one active voice call, to
put the call on hold, press the call key. To activate
the held call, press the call key again.
To send DTMF tone strings (for example, a password),
select Options Send
>
search for it in the contacts list. To enter a wait character
(w) or a pause character (p), press * repeatedly. To send
the tone, select OK. You can add DTMF tones to the phone
number or DTMF field in contact details.
To end an active call and replace it by answering the
waiting call, select Options
To end all your calls, select
Make calls
or
.
.
DTMF. Enter the DTMF string or
> Replace.
Options End all calls.
>
.
27