Display Indicators - Nokia 5800 XpressMusic User Manual

the same code on the other device, and select OK. The
devices are now paired.
Some earlier Nokia devices may not have the Switch
application. In this case, the Switch application is sent
to the other device as a message. To install the Switch
application on the other device, open the message,
and follow the instructions on the display.
4. On your device, select the content you want to transfer
from the other device.
When the transfer has started, you can cancel it and
continue later.
Content is transferred from the memory of the other
device to the corresponding location in your device. The
transfer time depends on the amount of data to be
transferred.

Display indicators

The device is being used in a GSM network (network
service).
The device is being used in a UMTS network (network
service).
You have one or more unread messages in the Inbox
folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
© 2009 Nokia. All rights reserved.
The ringing type is set to Silent, and the message and
e-mail alert tones are turned off.
A timed profile is active.
The touch screen and keys are locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are diverted to another
number (network service). If you have two phone lines, a
number indicates the active line.
A compatible headset is connected to the device.
A compatible TV out cable is connected to the device.
A compatible text phone is connected to the device.
A data call is active (network service).
A GPRS packet data connection is active (network
service). indicates that the connection is on hold and
that a connection is available.
A packet data connection is active in a part of the
network that supports EGPRS (network service).
indicates that the connection is on hold and
connection is available. The icons indicate that EGPRS is
available in the network, but your device is not necessarily
using an EGPRS connection to transfer data.
A UMTS packet data connection is active (network
service). indicates that the connection is on hold and
that a connection is available.
Your device
that a
21