Security Settings - Nokia 5800 XpressMusic User Manual

server profiles, view existing software version and device
information, or view and manage existing server profiles.
If software updates over the air are supported by your
network, you may also be able to request updates through
the device.
You may receive server profiles and different
configuration settings from your service providers and
company information management department. These
configuration settings may include connection and other
settings used by different applications in your device.
To connect to the server and receive configuration
settings for your device, select
profiles, a profile, and Options
To create a server profile, select
profiles Options New server
> >
To delete a server profile, select the profile and
Delete.
To check for software updates, select
for updates.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls, until
the installation is completed and the device is restarted.
Be sure to back up data before accepting installation of an
update.
Downloading software updates may involve the
transmission of large amounts of data (network service).
© 2009 Nokia. All rights reserved.
Options Server
>
Start configuration.
>
Options Server
>
profile.
Options
Options Check
>
Make sure that the device battery has enough power, or
connect the charger before starting the update.

Security settings

Phone and SIM
Select Menu Settings
>
Security Phone and SIM
>
Select from the following:
PIN code request
●
requested each time the device is switched on.
Deactivating the PIN code request may not be allowed
by some SIM cards.
PIN code andPIN2 code
●
code. These codes can only include numbers. Avoid
using access codes similar to the emergency numbers
to prevent accidental dialling of the emergency
>
number. If you forget the PIN or PIN2 code, contact your
service provider. If you forget the lock code, contact a
Nokia Care point or your service provider.
Lock code — The lock code is used to unlock the
●
device. To avoid unauthorised use of your device,
change the lock code. The preset code is 12345. The
new code can be 4-255 characters long. Alphanumeric
characters and both uppercase and lowercase
characters can be used. The device notifies you if the
lock code is not properly formatted. Keep the new code
secret and separate from your device.
Phone autolock period
●
you can set a time-out after which the device
automatically locks. A locked device cannot be used
and Phone Phone mgmt.
>
card.
— When active, the code is
— Change the PIN and PIN2
— To avoid unauthorised use,
Settings
>
95