Wlan Internet Access Points - Nokia E72 User Manual

Create access point groups
Select Menu Ctrl. panel
>
Destinations.
Some applications allow you to use access point groups to
connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and
use the group for browsing the web. If you give the WLAN
access point the higher priority, the device connects to the
internet through a WLAN if available and through a packet
data connection if not.
To create a new access point group, select
Manage New
>
To add access points to an access point group, select the
group and Options
existing access point from another group, select the
group, scroll to an existing access point, and select
Options Organise
>
To change the priority order of access points within a
group, scroll to an access point, and select
Organise Change
>
Packet data access points
Select Menu Ctrl. panel
>
Destinations Access
>
118
Settings and
>
destination.
New access point. To copy an
>
Copy to other dest..
>
priority.
Settings and
>
point, and follow the instructions
on the display. Or, open one of the access point groups,
and select an access point marked with
Connection
>
Use the instructions provided by your service provider to
edit the following:
Access point name
•
provided by your service provider.
User name
•
a data connection, and is usually provided by your
service provider.
Prompt password
•
ask for a password every time you log in to a server, or
if you do not want to save your password in the device,
select Yes.
Password
•
data connection and is usually provided by your service
provider.
Authentication
•
password encrypted or
Options
>
encrypted when possible.
Homepage
•
are setting up, enter the web address or the address of
the multimedia message centre.
Use access point
•
the device to ask for confirmation before the
connection using this access point is created, or
Automatically
Options
destination using this access point automatically.
>
Select Options
following:
Network type
•
Connection
>
transfer data to and from your device. The other
settings depend on the selected network type.
— The access point name is
— The user name may be needed to make
— If you want to set the device to
— A password may be needed to make a
— Select Secure to always send your
Normal to send your password
— Depending on the access point type you
— Select After confirmation
to set the device to connect to the
Advanced settings and from the
>
— Select the internet protocol type to
.
to set