Move On A Map; Display Indicators; Plan A Route - Nokia N86 User Manual

Rotate the
device around
all axes in a
continuous
movement
until the
calibration
indicator
changes its
colour to
green . If the
indicator is
yellow , the accuracy of the compass is low. If the
indicator is red, the compass is not calibrated.

Move on a map

When the GPS connection is active,
current location on the map.
To view your current or last known location, select
Options My position.
>
To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
When you have an active data connection and browse
the map on the display, a new map is automatically
downloaded if you scroll to an area not covered by the
maps that have already been downloaded. The maps
Cyan Cyan Cyan Cyan
are automatically saved in the device memory or on a
compatible memory card, if inserted.
To zoom in and out on the map, press * and #.
To change the map type, select
mode.

Display indicators

The GPS indicator
the satellite signals. One bar is one satellite. When the
device tries to find satellite signals, the bar is yellow.
When the device receives enough data from the
satellites for GPS to calculate your location, the bar
turns green. The more green bars, the more reliable
the location calculation.
Initially, your device must receive signals from at least
four satellites to calculate the coordinates of your
shows your
location. After the initial calculation, signals from three
satellites may be enough.
The data transfer indicator
internet connection used, and the amount of data
transferred since the application started.

Plan a route

To plan a route, scroll to your start point on the map,
press the scroll key, and select
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Options Map
>
shows the availability of
shows the
Add to route. To add
39