Xcruiser XDSR4000HD User Manual page 32

Upgrade by FTP
When receiver is connected to the
Internet, software updates from the file
located in FTP server.
Note
This function depends on connection to the remote
server. In case of no software on server, this
function will not work.
Upgrade by RS232:
1. We offer the functions for user to
connecting receiver (Master) to
the other receiver (Slave) via serial
interface.Connect master receiver to
slave receiver via serial interface. Enter
"Software Upgrade" menu in master
32
receiver and press [Vol Up/Vol Down]
keys to switch upgrade mode: All
SW+bootloader /All SW + Channel list/
Software (no channel list) /Channel list.
2. Highlight "Start" on master receiver
and press [OK] key to start upgrade.
3. Turn on slave receiver and it needn't
operate any setting.
4. Press [Exit] key to draw back.
Backup to USB
In this menu, you can dump the software
to the USB equipment.
1. In "Backup file", you can press [OK] key
to edit the file name.; Press "Left/Right"
button select USB A or USB B;
2. In "Backup to USB", you can press [OK]
to start backup software .
Upgrade By Satellite:
This function can upgrade the software
through signal lines from the satellite.
1. Select the satellite and TP or input
the TP value and download PID, these