Software Upgrade - Xcruiser XDSR4000HD User Manual

3. OSD Timeout: When you switch
channels in full screen, there will show
up some information about current
channel on the lower of the screen.
And regarding to the duration of these
information show up on the screen,
you can press [OK] and [Up/ Down]
key to set the time. The range of the
duration is "1 second ~ 10 seconds".
4. OSD Position: Control display position
of the info bar in full screen mode. You
can choose "Bottom" or "Top".

11.8 Software Upgrade

By USB
In this menu you can upgrade the
software from USB conveniently, Press
31
"Left/Right" button select USB A or USB
B; press [OK] button to enter.
In this menu you can select the Upgrade
Mode among Software (No channel list),
Channel list, All SW+bootloader and All
SW+Channel list, and you can select the
appropriate upgrade file on "Upgrade
File" item. After you select the "Upgrade
Mode" and "Upgrade File", press 'OK'
button on "Start" item, the receiver can
upgrade automaticlly.
Note
You must put the upgrade file on the /ROOT
DIRECTORY of the USB storage.
Upgrade by Http
1. When connected to the Internet, receiver
can manually or automatically make
software update from file in the server.
Note
This function depends on connection with external
server. In case of no software on server, this
function will not work.