Parental Control; Miscellaneous Settings - Xcruiser XDSR4000HD User Manual

11.6 Parental Control

You can set a password for anyone who
wishes to operate in the "Installation"
menu. And you can also set the password
for the lock channels. (How to set the
lock channel please refer to LOCK) Here
will show you how to setting and how to
revising the password.
1. In "Parental Lock" function, press [OK]
key, there will pop an dialogue for you
to input the password. When you input
the correct password, you will see a
screen like below.
2. Menu Lock determining that when
user wish to enter "Installation" menu,
whether have to input Password or
30
not. If the setting of "Menu Lock" is
"On" which means user have to key in
password, set "Off" means unlock.
3. Channel Lock determining that when
user wish to play the lock channels,
whether have to input the password or
not. If the setting is "On", lock mark will
show up and a dialogue on the screen
asks for the password. If the setting
of "Channel Lock is "Off", the Lock
function will be invalid.
4. New Password is used for revising
password; you can input the new
password in this item by using number
keys directly. After you filled in 4 digital
numbers, the highlight will auto skip
to Confirm Password and ask you to
input the new password again. If the
password is correct, the screen will
show up a message of "Saving Data,
Please Wait..." After finish saving and
draw back to "System Setup" menu,
the revising is complete.
5. Press [EXIT] key to draw back from the
"Parental Lock" menu.

11.7 Miscellaneous Settings

When you enter to "Miscellaneous
Settings" menu, you will see a screen like
above.
1. Subtitle Auto: Press [Vol Up/Vol Down]
key to select "On" or "Off". If the current
channel has subtitle information, it
will be showed up automatically while
this function is "ON", if this function is
"OFF", you need turn on the subtitle
manually by press [Yellow] key.
2. Auto Power Down: Press [Volume Up/
Volume Down] key to select the time
or "Off", if you select time, duration this
time if no any operation on receiver, it
will go to standby mode.